Electro-pneumatic Regulator ER100
Instruction Manual
rev. 2.0
page 29 / 38
4.4.5. Proportional Value Change
In the state of screen F5, press and hold the [SET] key at least for two seconds.
The “F5 setting mode” starts.
Inserire il valore target
For two seconds or longer
For two seconds or longer
For two seconds or longer
For two seconds or longer
For two seconds or longer
For two seconds or longer
For two seconds or longer
If the proportional value change function is not used *Factory shipment setting
After the data is settled, the setting mode is canceled to return to screen F5.
in case of operation with increased proportional value
After the data is settled, the setting mode is canceled to return to screen F5.
In case of operation with decreased proportional value
After the data
is settled, the
setting mode is
canceled to
return to
screen F5.
After the data
is settled, the
setting mode is
canceled to
return to
screen F5.
After the data
is settled, the
setting mode is
canceled to
return to
screen F5.
Select the setting level.
Key: The setting level increases.
key: The setting level decreases.
Select the setting level.
Key: The setting level increases.
key: The setting level decreases.
* In case of operation with decreased proportional value, the action follows the setting level displayed on
the screen even during setting level selection.
To settle the setting level, press and hold the [SET] key for two seconds.
