VC-5MC-M/C110H User's Manual
Page 59 of 109
9.2
Multi-ROI
The VC-5MC-M/C110H camera provides the Multi-ROI feature which allows you to define up to
8 regions of the sensor array. When an image is acquired, only the pixel information from the
defined regions will be readout of the sensor. The pixel data read out of the regions will then be
combined together and will be transmitted from the camera as a single image.
The XML parameters related to Multi-ROI are as follows.
XML Parameters
Value
Description
MultiRoiControl MultiRoiSelector
Region0 -
Region7
Selects the ROI to set
MultiRoiMode
On/Off
Enables/Disables the selected ROI
MultiRoiWidth
8 - 2448
Width setting for the selected ROI
MultiRoiHeight
16 - 2048
Height setting for the selected ROI
MultiRoiOffsetX
0 - 2448
Horizontal offset from the origin to the
selected ROI
MultiRoiOffsetY
0 - 2048
Vertical offset from the origin to the
selected ROI
MultiRoiValid
a
-
Verifies the validation of the Multi-ROI
setting values
MultiRoiStatus
Active/Inactive Displays the status of the Multi ROI feature
Active: The Multi-ROI feature is in use
Inactive: The Multi-ROI feature is not in use
The unit for all parameters in this table is pixel.
a: If the setting values for the Multi-ROI feature are valid, ‘True’ will be returned or the check box will
be selected.
Table 9-4 XML parameters related to Multi-ROI
It is recommended that you first set the
MultiRoiWidth
parameter, since all of the regions must
be the same width. The next step in the setup process is to define each individual region as
desired. Up to 8 regions can be set up ranging from 0 through 7. Use the
MultiRoiSelector
parameter to select which ROI to set and then set the ROI to On/Off by using the
MultiRoiMode
parameter. Then, set the
MultiRoiOffsetX
,
MultiRoiOffsetY
and
MultiRoiHeight
parameters to
define each region.
