VC-5MC-M/C110H User's Manual
Page 33 of 109
7.4
Trigger Input Circuit
The following figure shows trigger signal input circuit of the 6-pin connector. Transmitted trigger
signal is applied to the internal circuit through a photo coupler. With the Debounce feature, you
can specify the width of input signal to be considered as a valid input signal. An external trigger
circuit example is shown below.
Figure 7-4 Trigger Input Schematic
7.5
Strobe Output Circuit
The strobe output signal comes out through a 3.3 V output level of TTL Driver IC. A pulse width
of signal is synchronized with an exposure (shutter) signal of the camera, and comes out.
Figure 7-5 Strobe Output Schematic