VC-5MC-M/C110H User's Manual
Page 45 of 109
External Trigger Delay
When you set the
Trigger Source
parameter to
Timer0Active
, you can specify a delay between
the receipt of a hardware trigger signal and when the trigger becomes effective.
1.
Set the
Timer Trigger Source
parameter in the
Counter And Timer Control
category to
Line0
.
2.
Set the
Timer Delay
parameter to the desired Timer delay in microseconds.
3.
Set the
Trigger Source
parameter in the
Acquisition Control
category to
Timer0Active
.
4.
Execute the
Acquisition Start
command and inject an externally generated electrical
signal into the Control I/O receptacle. Then, the delay set by the
Timer Delay
parameter
expires and the exposure for image acquisition begins.
Figure 8-3 External Trigger Delay