OPERATING AND USER MANUAL QUARTZ SERIES
9
Precautions
2.
NOTE:
It is advised to include the text of this chapter in the assembly documents of the system in
which the camera is used.
A CMOS sensor camera is a sensitive device. Please read the following precautions carefully before
you continue unpacking or operating the camera.
Safety precautions
2.1
General
2.1.1.
It is advised to unpack and handle the camera in a clean, ESD protected working area.
It is advised to read the whole manual before using the camera.
Safety symbols
2.1.2.
The following safety symbols are applicable to and indicated on the camera.
Symbol for “Conformiteé European”
The exclamation mark within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the instrument.
Handling
2.2
General
2.2.1.
In order to prevent damage to the camera and to keep the CMOS sensor clean, please take the
following precautions.
Always keep the sensor cap in place, as long as no lens is attached.
•
Remove the lens cap just before the lens is screwed on the camera. It is advised to perform this
•
operation in a clean room or clean bench.
Never touch the CMOS sensor surface. The cover glass is easily damaged and the CMOS sensor
•
can be damaged by ESD (electrostatic discharge).
Cleaning of the CMOS sensor
2.2.2.
Cleaning of a CMOS sensor is a rather difficult task. Depending on the aperture of the lens used, any
dust particles with a size of 10µ and larger can show up in your image.
All cameras are checked for cleanliness in our factory before shipment. Proper handling instructions
during system assembly can prevent the CMOS sensor from getting contaminated.
Should cleaning of the CMOS sensor be necessary follow the instruction below.
NOTE:
that damage of the CMOS sensor due to scratches on the cover glass or electrostatic
discharge (ESD) is not covered by warranty!
The correct working environment for cleaning is essential in order to ease cleaning and to prevent
damage of the CMOS sensor.
Summary of Contents for Q-2A340
Page 1: ...Operating and user manual QUARTZ SERIES CAMERA LINK MODELS...
Page 2: ...OPERATING AND USER MANUAL QUARTZ SERIES 2...
Page 5: ...OPERATING AND USER MANUAL QUARTZ SERIES 6...
Page 11: ...OPERATING AND USER MANUAL QUARTZ SERIES 12...
