Cameo S2 IP, User Manual

Page: 30 / 236

30
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
The 28 mm TV spigot previously mounted on the U-bracket can also be used for truss mounting.
Use a suitable fastener and ensure a firm hold. To adjust the direction of radiation on a vertical
plane, loosen the clamping levers mounted on the U-bracket slightly, set the desired direction of
radiation and tighten the clamping levers again. Secure the headlamp to the safety eyelet using a
suitable safety rope (fig. A).
OMEGA BRACKET
The Omega double bracket is included with the headlamp.
HAZARD
Overhead mounting requires extensive experience, including the calculation
of the load limit values of the installation material and regular safety inspection of all
installation materials and spotlights. If you do not have these qualifications, do not
attempt to perform an installation yourself. Refer instead to a qualified professional.
There is a risk that devices that are incorrectly mounted and secured may come loose
and fall down. This can cause serious injury or death.