Cameo S2 IP, User Manual

Page: 19 / 236

19
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
Turn encoder =
Set overall brightness (DIM)
Press encoder =
Selection of the operating mode
Turn encoder =
Set digit 3 and 4 after the decimal point
Press encoder =
Open main menu (Menu)
Turn encoder =
Set digit 1 and 2 after the decimal point
Press encoder =
switch between x and y (Next Coordinate)
STANDALONE MODE COLOUR PRESETS (GEL)
Starting from the main display, press the left-hand rotary-push encoder to access the menu for
selecting the operating mode. Turn the left encoder (SELECT) to select
GEL (note the selection
arrow on the left) and confirm by pressing the left encoder (ENTER). Now set the overall bright-
ness (DIM) using the left encoder and select one of the available Lee-Filter colour presets (Dark
Magenta to Rose Pink) using the middle rotary-push encoder (see illustration).
Turn encoder =
Set overall brightness (DIM)
Press encoder =
Selection of the operating mode
Press encoder =
Open main menu (Menu)
Turn encoder =
Select colour preset
STANDALONE OPERATING MODE USER COLOURS (User Colour)
Starting from the main display, press the left-hand rotary-push encoder to access the menu
for selecting the operating mode. Turn the left encoder (SELECT) to select
User Colour
(note
the selection arrow on the left) and confirm by pressing the left encoder (ENTER). Now set the
brightness (DIM) using the left encoder and select one of the eight user colours (USER_COLOUR_1
to USER_COLOUR_8) using the middle rotary-push encoder (see illustration). The user colours can
be edited individually (Main Menu -> Edit User Colour).