Cameo S2 IP, User Manual

Page: 15 / 236

15
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
DISPLAY MAIN DISPLAY IN DMX MODE
The main display in DMX mode shows the currently set DMX start address, DMX mode and other
information (see illustration).
= DMX signal is present = no DMX signal Currently activated operating mode
W-DMX status
DMX mode
DMX start address
next free DMX start address
Press encoder =
Selection of the operating mode Press encoder =
Open main menu (Menu)
DISPLAY MAIN DISPLAY IN THE ARTNET OR SACN OPERATING MODE
The main display in Artnet or sACN mode shows the DMX mode, the currently set DMX start
address, the IP address and universe group and the universe (see illustration).
Currently activated operating mode
W-DMX status
DMX mode
DMX start address
IP address
Universe and group
Press encoder =
Selection of the operating mode Press encoder =
Open main menu (Menu)
W-DMX
™
To pair a W-DMX receiver with a W-DMX compatible transmitter, W-DMX must be switched on in
the Settings menu of the receiver under Wireless Settings (WDMX State -> On), the unit must be
configured as a receiver (Operating Mode -> Receive) and the command Reset must be executed
(Receive Reset -> Yes). The receiver is now in pairing standby and waiting for a pairing request
from a transmitter. Start the pairing by selecting Link in the menu of the transmitter and confir-
ming; the pairing now takes place automatically. In the same way, several receivers can be paired
simultaneously or one after the other to a transmitter (e.g. for master/slave operation). A W-DMX
connection is always maintained until the connection is disconnected by means of the Reset com-
mand in the receiver or the Unlink command in the transmitter, regardless of whether a device
has been disconnected from the power supply in the meantime.