CAME ZL60, Installation Manual

Page: 22 / 48

M2
M1
A A
B
M2
M1
B
M2 M1
2
2
1 1
M2 M1
A A
B
M2 M1
B
M2 M1
p.
1
0
10
- M
an
u
al c
o
d
e:
3
1
9
W
7
6
31
9
W
76
v.
11
0
6
/2
0
1
4 © C
A
M
E S
.p
.A
. - T
h
e d
at
a a
n
d i
n
fo
rm
at
io
n i
n t
h
is m
an
u
al m
ay b
e c
h
an
g
ed a
t a
n
y t
im
e a
n
d w
it
h
ou
t n
ot
ic
e.
Deleting all users
Select the DIPs as shown and press the PROG key on the board for 5 s.
Once deleting is finished, the PRG LED stays on the buzzer sounds off for 1 s.
Resetting parameters
Select the DIPs as shown and press the PROG key on the board for 5 s.
Once deleting is finished, the PRG LED stays on the buzzer sounds off for 1 s.
With this feature users are not deleted.

If you wish to change the closing and opening slow down starting points, proceed as follows:
- during the second (M2) gearmotor's opening
maneuver, press the PROG button at the moment in
which the gate leaf reaches the desired closing slow
down point

- press PROG to establish the opening slow down
starting point

.
Repeat the procedure also for the first (M1)
gearmotor.
With timed slow downs

Disable the encoder feature, enable the timed slow down one and memorize the maximum working time (+).
Select the DIPs for self-learning the gate travel and press the PROG key on the board as shown on features programming.
The gate will perform a series of maneuvers to
determine the slow down and endstop starting
points.
A = 25% of the working time at slowed opening
speed.
B = 25% of the working time at slowed closing
speed.
With encoder and timed slow downs disabled

If the Encoder and timed Slow down
features are both disabled, the gate leaves will
perform a complete travel at a constant speed of
50% of the maximum speed.
Self-learning of the gate-leaf travel
With enabled encoder (factory setting)

Select the DIPs and press the PROG key on the board as shown in features programming.
The gate will perform a series of maneuvers to
establish the slow down starting and endstop points.
A = 25% of the area of movement at slowed down
opening speed.
B = 25% of the area of movement at slowed down
closing speed.