P
age
12
- Manual
FA01440-EN
- 07/2020 - © C
AME S.p.A. - The contents of this manual may be changed at any time and without notice. - T
ranslation of the o
riginal instructions
Fit the boom into the fastening flange.
Tighten the screws firmly.
1
Cut the slot-cover profiles to the same size as the boom slot minus 10 millimetres.
2
Insert the slot-cover profiles into the grooves on both sides of the boom.
3
Fit the rubber end cap in position.
4
Insert the anti-impact rubber profile into the groove, aligning it with the end cap.
5
Cut the excess part of the profile, leaving a 7 mm overhang.
6
Insert the rubber profile end cap into the groove in the boom closing cap. Use the screws to fasten the boom end cap.
7
Fit the anti-shearing protective cover onto the boom-attachment cover and fasten it using the screws supplied.
❶
❷
❸
❹
❺
❻
⚠
❼
