P
age
13
- Manual
FA01440-EN
- 07/2020 - © C
AME S.p.A. - The contents of this manual may be changed at any time and without notice. - T
ranslation of the o
riginal instructions
Boom set up
Before adjusting the boom, check the accessories you want to fit and the passage clearance width.
Simple boom means the boom complete with slot cover, cap and rubber profile.
Passage width clearance / Duty-cycle
intermittence
< 2.5 m / 80%
< 2.5 m / 100%
2.5 < 2.75 m / 100%
from 2.5 a 3.8 m /
100%
Simple boom
A1 = 1
A1 = 2
A1 = 1
A1 = 2
Boom with LED STRIP
A1 = 1
A1 = 2
A1 = 1
A1 = 2
Balance springs
NO
NO
A1 = 1
A1 = 2
001G02807 fixed support: must be used for passage clearance widths exceeding 3 m.
With A1 = 1, fast profile, the boom opening time varies from 1.2 to 2.5 seconds.
With A1 = 2, slow profile, the boom opening time varies from 2.5 to 4 seconds.
Determining the travel end points with mechanical limit switches
Check that the boom is parallel to the road surface when it is in the closed position and at about 89° when it is in the open position.
Correct the boom’s horizontal position
Release the gearmotor.
Open the inspection hatch.
1
Turn the mechanical stop until you reach the desired boom position.
2
Fasten the mechanical stop with a locknut.
Lock the gearmotor
~1°
~89°
+
-
❶
❷
+
-
