P
age
26
- Manual
FA01509-EN
- 05/2021 - © C
AME S.p.A. - The contents of this manual may be changed at any time and without notice. - T
ranslation of the o
riginal instructions
Self-Learning Rolling
Save a new rolling code transmitter by activating acquisition from a rolling code transmitter that has already been saved. The saving and acquisition procedures are
explained in the transmitter manual.
U8
Self-Learning Rolling
OFF (Default)
ON
Travel calibration
Start the travel self-learning.
This function appears only if the [Encoder] function is active.
A3
Travel calibration
OFF (Default)
ON
Parameter reset
Restore factory settings except for the functions: [Radio decoding], [Motor type] and the settings related to travel calibration.
A4
Parameter reset
OFF (Default)
ON
Manoeuvre counter
View the number of operator manoeuvres.
A5
Manoeuvre counter
001 = 100 manoeuvres
010 = 1000 manoeuvres
100 = 10000 manoeuvres
999 = 99900 manoeuvres
CSI = Maintenance work
Adjusting the motor torque
Adjust the motor torque.
A6
Adjusting the motor torque
1 (minimum) to 5 (maximum) (Default 5)
FW version
Display the firmware version number.
H1
FW version
