cnReach N500 User Guide
System Configuration
phn-4673_003v000 (November 2018)
2-59
Enter the Device ID for the radio on the opposing end of the link and press Ping.
Note
When using this utility on a cnReach N500 radio, it is necessary to select which Source Radio (RF Module) to use for the
test.
Once the test is initiated the radio will attempt one “ping” at the RF protocol level. This is not the same
pings as ICMP; they are strictly at the RF level.
Each successful ping will report signal and noise information for both the local and remote radios at
opposing ends of the link.
The RF Ping Utility provides users with a diagnostic tool that can be used to:
•
Verify that a remote End Point can be heard by the Access Point.
•
Verify a specific End Point is connected to the Access Point and able to communicate.
•
Obtain signal information at the Access Point for a specific link.
Clear can be used to remove previous test results from the page.
Radio ID is the ID of the opposing radio.
Name is the description given to the RF module of the opposing radio in Radio/Network Settings.
Signal and Noise levels are reported in dBm.
Summary of Contents for cnReach N500
