cnReach N500 User Guide
System Configuration
phn-4673_003v000 (November 2018)
2-2
User Interface Overview
cnReach radios can be configured using a web-based User Interface (UI). The preferred browsers are Google Chrome or
Mozilla Firefox to access the user interface, but most modern browsers should work. However, due to slightly different
behaviour among web-browsers it may occasionally be necessary to manually clear the cache or refresh a page or click on the
link on the left navigation bar to reload a page.
The PC/Laptop must have an IP address on the same subnet as the radio in order to communicate.
Attention
cnReach radios can be configured to use a (secure) HTTPS connection, therefore use of
https://<IP ADDRESS> is required only when configured to operate with https.
Default IP Address
The factory default IP address of all radios is 192.168.0.3
Please refer to the
Obtaining an Unknown IP Address
section in the Quick Start Guide if you cannot
access the User Interface.
Accessing the User Interface
The User Interface is accessed by initiating a secure HTTPS connection (or HTTP connection depending
on the radio’s configuration) from a Web Browser, via direct Ethernet port connection or active radio
link.
Type https://<IP ADDRESS> in the URL box; i.e. https://192.168.0.3
If this is the first time attempting to connect via https the browser may prompt you regarding privacy.
Certificates are usually associated with fully-qualified domain names and not individual IP addresses, so
this prompt is completely normal.
Note
This prompt only occurs the first time you connect to the Web Interface or after the browser history is cleared. Subsequent
login attempts will not prompt in this way. Access will be granted once the username and password have been successfully
entered.
Troubleshooting Access to the User Interface
If the connection times out, there are a few common issues.
1.
Computer is on a different subnet.
2.
The radios IP address has been changed.
3.
The radios IP address is duplicated with other devices (e.g. a radio was configured with the IP
address that had already been previously allocated/used).
4.
The HTTPS protocol may be required to connect to the radio.
Summary of Contents for cnReach N500
