User Manual
AMETEK Programmable Power
BPS Series
83
UTILITY 2
CONFIGURATION
The Configuration menu shows the installed options. This screen is for
reference only and typically, no fields can be changed by the user.
LANETWORK SETUP
Displays or sets LAN interface settings. If the LAN option is present,
this screen may be used to view or change LAN parameters. The
MAC address is fixed and cannot be changed. IP and Gateway
addresses are normally assigned by the network DCHP server.
Changes to the other fields can be made by pressing the SET button
first. The indicator in the top right hand of the screen will change from
“NC” to “SET”. Note that any setting changes made won’t take effect
till after the unit has been powered down and back up.
To set the LAN interface to AUTO IP mode, set the IP and Gateway
address to all zeros. This will cause the IP to be requested from the
network the next time power is cycled. To manually set the IP and
Gateway address, enter the address from the keypad.
The Port address is normally set to 5025. The number of host bits is a
function of the network address range.
