User Manual
AMETEK Programmable Power
BPS Series
49
P8 / P9
Description
26
CLA:
Current Limit A. Programmed current limit reference for phase A
27
CLC:
Current Limit C. Programmed current limit reference for phase C
28
CSB:
Current Sum Phase B.
29 N/C
30
FLT B:
Amplifier Fault Phase B
31 N/C
32 DC: DC
mode
control
33
INP OFF:
Input power control
34
A ERR HI: Error Signal Phase A, high
35 N/C
36
B ERR LO: Error Signal Phase B, low
37
C ERR HI: Error Signal Phase C, high
Table 4-4: System Interface Connectors
4.7.2
Analog Input Connector
Input screw-terminal strip. Functions are called out on rear panel decal. Table shows connections from left
to right when standing at the rear of the BPS cabinet.
Pin
Description
1
RPV HI.
INPUT: Analog input for External Modulation
2 RPV
Lo. INPUT:
return.
3
EXT SYNC HI
INPUT: Analog input for external sync mode.
4
EXT SYNC Lo
INPUT: return.
5
RI:
INPUT: Remote Inhibit. (See paragraph 4.10.)
6 RI:
INPUT:
return.
Table 4-5: Analog Interface Connector
