background image

 

Water Quality Maintenance 

2006 Portable Spa Owner's Manual 

Page 47

 

LTR20061000, Rev. A 

Chemical Descriptions 

The following descriptions and recommendations are intended for use with Cal Spas chemicals only. Many of 
these chemicals will be used with alternative sanitation systems as well. 

 

Test Strips -- Bromine 

Provides accurate spa water testing for Bromine, pH, and total Alkalinity. 

For use with bromine “Clear Water Plan” 

 

Test Strips -- Sodium Bromide 

Provides accurate spa water testing for Sodium Bromide.  

For use with Cal Clarity Automatic Bromine Generator “Clear Water Plan”. 

 

Test Strips – Chlorine 

Provides accurate spa water testing for Bromine, pH, and total Alkalinity. 

For use with chlorine “Clear Water Plan” 

 

Go Brom 

Establishes a bromide reserve in spa water.  

Use during start up. 

For use with bromine “Clear Water Plan”. 

 

Brominating Tablets 

Long lasting sanitizer / disinfectant for spa water.   

Add to bromine floater. 

For use with bromine “Clear Water Plan”. 

 

Chlorinating Granules 

Quick acting sanitizer / disinfectant for spa water. 

For use with chlorine “Clear Water Plan”. 

Summary of Contents for 2006 Portable spas

































































































Reviews: