CAEN
Electronic Instrumentation
DT55xxE Desktop HV Power Supply
12
4.
VT emulator control
Module access
The module is provided with a USB2.0 compliant interface and Ethernet Port (TCP/IP).
For link connection, refer to instructions given at page 10.
CAEN provides the CAEN GECO2020 Control Software that allows a friendly remote management of all
Unit’s functional parameters (see
www.caen.it software support page); anyway, the connection can be
performed also via VT emulators, we suggest to use Tera Term (see https://ttssh2.osdn.jp/index.html.en)
USB
Launch the terminal emulator (we suggest using
Tera Term), select the serial communication link
and set the virtual communication port
associated to the module. Select USB connection
and the used port number; set port as follows
baud rate 9600
Data bits: 8
Parity: none
stop bit: 1
Flow control: none
Launch communication
Type caen then <enter>;
Ethernet
Launch the terminal emulator (we suggest using
Tera Term), select port number
23
Please note that line editing must be disabled prior
to Ethernet access.
Default settings are:
IP address
192.168.0.1
Subnet mask
255.255.255.0
Gateway
255.255.255.0
Launch communication
Type caen then <enter>;
as the communication is established, the Main Menu will be displayed:
Fig. 10: Terminal Board Menu
Five options are available:
•
Display
•
Format
•
Update
•
Ethernet
•
Quit
Ethernet configuration
To configure the Ethernet Port; with reference to Fig. 10: Terminal Board Menu, Type E; the following
screen will open:
