Caen DT5519EN, Manual

Page: 16 / 17

CAEN
Electronic Instrumentation
DT55xxE Desktop HV Power Supply
16
$CMD:MON,CH:XX,PAR:IMIN Min value of ISET
$CMD:MON,CH:XX,PAR:ISDEC Decimal digits of ISET
$CMD:MON,CH:XX,PAR:IMON IMON value
$CMD:MON,CH:XX,PAR:IMRANGE IMON range (high /low)
$CMD:MON,CH:XX,PAR:IMRESL IMON resolution in low range
$CMD:MON,CH:XX,PAR:IMRESH IMON resolution in high range
$CMD:MON,CH:XX,PAR:IMDECL Decimal digits of IMON in low range
$CMD:MON,CH:XX,PAR:IMDECH Decimal digits of IMON in high range
$CMD:MON,CH:XX,PAR:MAXV VMAX value
$CMD:MON,CH:XX,PAR:MVMIN VMAX minimum value
$CMD:MON,CH:XX,PAR:MVMAX VMAX maximum value
$CMD:MON,CH:XX,PAR:MVRES VMAX resolution
$CMD:MON,CH:XX,PAR:MVDEC Decimal digits of VMAX
$CMD:MON,CH:XX,PAR:PDWN Power down mode Ramp / Kill
$CMD:MON,CH:XX,PAR:POL Polarity
$CMD:MON,CH:XX,PAR:STAT Status
IS_ON 1 Channel On
IS_UP 2 Channel Ramping Up
IS_DOWN 4 Channel Ramping Down
IS_OVC 8 Channel in Overcurrent
IS_OVV 0x10 Channel in OverVoltage
IS_UNV 0x20 Channel in UnderVoltage
IS_MAXV 0x40 Channel in MaxV
IS_TRIP 0x80 Channel in Trip
IS_MAXPW 0x100 Channel in MaxPower
IS_TWARN 0x200 Channel in Temperature warning (>80°C)
IS_OVT 0x400 Channel in OVT (>125°C)
IS_KILL 0x800 Channel Killed
IS_INTLCK 0x1000 Channel in Interlock
$CMD:MON,CH:XX,PAR:RUP RAMP UP value
$CMD:MON,CH:XX,PAR:RUPMIN RAMP UP minimum value
$CMD:MON,CH:XX,PAR:RUPMAX RAMP UP maximum value
$CMD:MON,CH:XX,PAR:RUPRES RAMP UP resolution
$CMD:MON,CH:XX,PAR:RUPDEC Decimal digits of RAMP UP
$CMD:MON,CH:XX,PAR:RDW RAMP DOWN value
$CMD:MON,CH:XX,PAR:RDWMIN RAMP DOWN minimum value
$CMD:MON,CH:XXPAR:RDWMAX RAMP DOWN maximum value
$CMD:MON,CH:XX,PAR:RDWRES RAMP DOWN resolution
$CMD:MON,CH:XX,PAR:RDWDEC Decimal digits of RAMP DOWN
$CMD:MON,CH:XXPAR:TRIP Trip value
$CMD:MON,CH:XX,PAR:TRIPMIN Trip minimum value
$CMD:MON,CH:XX,PAR:TRIPMAX Trip maximum value
$CMD:MON,CH:XX,PAR:TRIPRES Trip resolution
$CMD:MON,CH:XX,PAR:TRIPDEC Decimal digits of Trip
Set Commands
$CMD:SET,CH:XX,PAR:VSET,VAL:XXX.XX VSET value
$CMD:SET,CH:XX,PAR:ISET,VAL:XXXX.XX ISET value
$CMD:SET,CH:XX,PAR:IMRANGE,VAL:LOW IMON range low
$CMD:SET,CH:XX,PAR:IMRANGE,VAL:HIGH IMON range high
$CMD:SET,CH:XX,PAR:RUP,VAL:XXX RAMP UP value
$CMD:SET,CH:XX,PAR:RDW,VAL:XXX RAMP DOWN value
$CMD:SET,CH:XX,PAR:PDWN,VAL:RAMP POWER DOWN ramp mode
$CMD:SET,CH:XX,PAR:PDWN,VAL:KILL POWER DOWN kill mode
$CMD:SET,CH:XX,PAR:ON Set Ch ON
$CMD:SET,CH:XX,PAR:OFF Set Ch OFF