Cadillac Escalade 2017 Owner'S Manual Download Page 17

Page: 17 / 377

Cadillac Escalade Owner Manual (GMNA-Localising-Europe-11374166) -

2018 - crc - 7/14/17

IN BRIEF

Power Folding Mirrors

1. Press

{

to fold the mirrors

inward.

2. Press

{

again to return the

mirrors to the driving position.

Heated Mirrors

Press

to heat the door mirrors.

See "Rear Window Demister" under

Dual Automatic Climate Control System

177

Steering Wheel Adjustment

To adjust the power tilt and
telescoping steering wheel:

Press the control to move the steering
wheel up and down or forward and
rearward.

Do not adjust the steering wheel while
driving.

Throttle and Brake Pedal
Adjustment

If equipped, the position of the
throttle and brake pedals can be
changed.

Press the top of the switch to move
the pedals closer to your body. Press
the bottom of the switch to move the
pedals away.

See

Adjustable Throttle and Brake Pedal

202

The vehicle may have a memory
function, which lets pedal settings be
saved and recalled. See

Memory Seats

Summary of Contents for Escalade 2017


























































































































































































































































































































































































Search results

Summary of Contents for Escalade 2017

Reviews:

Related manuals for Escalade 2017

Brands by name

Popular brands

Cadillac Escalade 2017, Owner'S Manual

Search results

Summary of Contents for Escalade 2017

Reviews:

Related manuals for Escalade 2017

Brands by name

Popular brands