Cadillac Escalade Owner Manual (GMNA-Localising-Europe-11374166) -
2018 - crc - 7/14/17
318
VEHICLE CARE
9. Spare Tyre (Valve Stem
Pointed Down)
10. Tyre/Wheel Retainer
11. Hoist Cable
1. Open the hoist shaft access
door (3) on the bumper to access
the spare tyre lock (6).
If equipped with a hitch cover,
turn the hitch cover retainers
anti-clockwise and pull the cover
downward to remove it before
removing the hoist shaft
access door.
2. To remove the spare tyre lock
(6), insert the key located inside
the remote, turn it clockwise,
and then pull it straight out.
3. Assemble the two jack handle
extensions (4) and wheel
wrench (5), as shown.
4. Insert the open end of the
extension (7) through the hole in
the rear bumper (8) (hoist shaft
access hole).
Be sure the hoist end of the
extension (7) connects to the
hoist shaft. The ribbed square
end of the extension is used to
lower the spare tyre.
5. Turn the wheel wrench
anti-clockwise to lower the spare
tyre to the ground. Continue to
turn the wheel wrench until the
spare tyre can be pulled out from
under the vehicle.