Cadillac Escalade 2017 Owner'S Manual Download Page 13

Page: 13 / 377

Cadillac Escalade Owner Manual (GMNA-Localising-Europe-11374166) -

2018 - crc - 7/14/17

IN BRIEF

See

Lumbar Adjustment

To adjust bolster support, if equipped:

Press and release or hold Feature
Select (1) to scroll to bolster
support on the infotainment
display.

Press Forward (5) or Rearward (3)
to adjust bolster support inward or
outward.

See

Lumbar Adjustment

Upper Shoulder Support

To adjust upper shoulder support,
if equipped:

Press and release or hold Feature
Select (1) to scroll to upper
shoulder support on the
infotainment display.

Press Forward (5) or Rearward (3)
to adjust shoulder support forward
or rearward.

See

Lumbar Adjustment

Reclining Seat Backrests

Base Shown, Uplevel Similar

To adjust the seat back:

Tilt the top of the control
rearward to recline.

Tilt the top of the control forward
to raise.

See

Reclining Seat Backrests

Summary of Contents for Escalade 2017


























































































































































































































































































































































































Search results

Summary of Contents for Escalade 2017

Reviews:

Related manuals for Escalade 2017

Brands by name

Popular brands

Cadillac Escalade 2017, Owner'S Manual

Search results

Summary of Contents for Escalade 2017

Reviews:

Related manuals for Escalade 2017

Brands by name

Popular brands