Cadillac Escalade Owner Manual (GMNA-Localising-Europe-11374166) -
2018 - crc - 7/14/17
VEHICLE CARE
323
Store the tyre under the rear of the
vehicle in the spare tyre carrier. Refer
to the following graphics and
instructions:
1. Hoist Assembly
2. Hoist Shaft
3. Hoist Shaft Access
Cover/Hole
4. Jack Handle Extensions
5. Wheel Wrench
6. Spare Tyre Lock
7. Hoist End of Extension Tool
8. Hoist Shaft Access Hole
9. Spare Tyre (Valve Stem
Pointed Down)
10. Tyre/Wheel Retainer
11. Hoist Cable
1. Put the tyre (9) on the ground at
the rear of the vehicle with the
valve stem pointed down, and to
the rear.
2. Tilt the tyre toward the vehicle.
Separate the tyre/wheel retainer
from the guide pin. Pull the pin
through the centre of the wheel.
Tilt the retainer down through
the centre wheel opening.
Make sure the retainer is fully
seated across the underside of
the wheel.
3. Assemble the two jack handle
extensions (4) and wheel
wrench (5).
4. Insert the open end of the
extension (7) through the hole in
the rear bumper (8) (hoist shaft
access hole).
5. Raise the tyre part way upward.
Make sure the retainer is seated
in the wheel opening.
6. Raise the tyre fully against the
underside of the vehicle by
turning the wheel wrench
clockwise until you hear two
clicks or feel it skip twice. The
cable cannot be overtightened.