Cadillac Escalade 2017, Owner'S Manual

Page: 64 / 377

Cadillac Escalade Owner Manual (GMNA-Localising-Europe-11374166) -
2018 - crc - 7/14/17
SEATS AND RESTRAINTS 63
2. Adjust all available memory
features to the desired driving
position.
3. Press and release SET; a beep
will sound.
4. Immediately press and hold the
1 or 2 memory button matching
the above DIC welcome message
until two beeps sound.
If too much time passes between
releasing SET and pressing 1, the
memory position will not be
saved and two beeps will not
sound. Repeat Steps 3 and 4.
1 or 2 corresponds to the driver
number. See
“ Identifying Driver
Number ” in this section.
5. Repeat Steps 1 – 4 for a second
driver using 1 or 2.
To save positions for
B
and easy exit
features, repeat Steps 1 – 4 using
B
.
This stores the positions for getting
out of the vehicle.
Save preferred memory feature
positions to both 1 and 2 if you are
the only driver.
Manually Recalling Memory
Positions
Press and hold 1, 2, or
B
to recall
the previously stored memory
positions.
To stop manual recall movement,
release 1, 2 or B. Recall can also be
stopped by pressing a power seat, SET,
power mirror control, power steering
wheel control, or adjustable pedal
control, if memory equipped. The
driver or passenger side mirror must
be selected.
Auto Memory Recall
The vehicle identifies the number of
the current driver's RKE transmitter
(1
– 8). See Remote Keyless Entry (RKE)
System Operation 0 28 . If the RKE
transmitter is 1 or 2, and Auto
Memory Recall is programmed on in
vehicle personalisation, the positions
saved to the same memory button
number 1 or 2 are automatically
recalled when the ignition is turned
on, or turned from off to ACC/
ACCESSORY. RKE transmitters 3
– 8
will not provide automatic memory
recalls.
To turn Auto Memory Recall on or off,
see "Vehicle Personalisation Settings"
previously in this section and
Vehicle
Personalisation 0 156 .
The transmission must be in P (Park)
to initiate Auto Memory Recall. Auto
Memory Recall will complete if the
vehicle is shifted out of P (Park) prior
to reaching the stored memory
position.
To stop Auto Memory Recall
movement, turn the ignition off or
press any of the following memory
controls:
.
Power seat
.
Memory SET, 1, 2, or
B
.
Power mirror, with the driver or
passenger side mirror selected
.
Power steering wheel, if equipped
.
Adjustable pedals, if equipped
If the stored memory seat position
does not automatically recall or recalls
to the wrong positions, the driver's
RKE transmitter number (1 or 2) may
not match the memory button
number that positions were saved to.