Cadillac Escalade Owner Manual (GMNA-Localising-Europe-11374166) -
2018 - crc - 7/14/17
DRIVING AND OPERATING
229
Warning (Continued)
Do not use ACC when:
.
On winding and hilly roads or
when the sensors are blocked
by snow, ice, or dirt. The
system may not detect a
vehicle ahead. Keep the entire
front of the vehicle clean.
.
Visibility is low, such as in
mist, rain, or snow conditions.
ACC performance is limited
under these conditions.
.
On slippery roads where fast
changes in tyre traction can
cause excessive wheel slip.
J
:
Press to turn the system on or
off. The indicator turns white on the
instrument cluster when ACC is
turned on.
+RES :
Press the control up briefly to
resume the previous set speed or hold
upwards to accelerate. If ACC is
already engaged, use to increase
vehicle speed.
SET
−
:
Press the control down briefly
to set the speed and activate ACC.
If ACC is already engaged, use to
decrease vehicle speed.
*
:
Press to disengage ACC without
erasing the selected set speed.
[
:
Press to select a following gap
time (or distance) setting for ACC of
Far, Medium, or Near.
The speedometer reading can be
displayed in either English or metric
units. See
.
The increment value used depends on
the units displayed.
Switching Between ACC and
Regular Cruise Control
If equipped, to switch between ACC
and regular cruise control, press and
hold
*
. A Driver Information Display
(DIC) message displays. See
.
ACC Indicator
Regular Cruise
Control Indicator
When ACC is engaged, a green
o
indicator will be lit on the instrument
cluster and the following gap will be
displayed. When the regular cruise
