Cadi Cadi.Sense, User Manual

Page: 6 / 36

Cadi. Sense User Manual
T-S1-800.900-I10-C01 6
2. How to set up and use the Cadi.Sense
2.1 Overview
Before using the Cadi.Sense, you will need to do the following:
1. Set up the system for wireless access, by following the instructions in Sections 2.2, 2.3,
2.4, and 2.5.
2. Understand the LED indicators and Cadi.Sense icons, by reading Sections 2.6 and 2.7
respectively.
3. Know how to attach the ThermoSensor to the patient, by following the instructions in
Section 2.8.
4. Know how to clean and store SmartNode and the ThermoSensor after each use, by
reading Section 2.9.
2.2 Setup I – Performing a quick setup
This setup enables you to access temperature readings at home from a mobile device.
Step 1:
Get ready a mobile device (iPhone, Android phone, tablet, or laptop) and record the
following information shown on your SmartNode plug:
SSID (e.g., CADI_XXXX): ____________________
PWD (8 chars): ____________________
SmartNode ID : ____________________
Step 2:
Plug in the SmartNode to a power socket in the same room where the patient will be
resting . Then switch it on. (Note: The SmartNode takes about 30 seconds to start up.)
Step 3:
Turn on WiFi on your mobile device. Look for the above SmartNode SSID in the wireless
network list. Then connect the mobile device to the SmartNode using the above
password (PWD, 8 chars).
Note: Some mobile devices may ask for the “network key”, which is the same as the
password.
Step 4:
Go to your mobile device’s web browser and enter
http://10.10.10.10
If Figure 1 appears, select your timezone and click “Save”. Otherwise Figure 2 will appear.
The quick setup is now done!
Note: After completing Setup I, you will need to proceed with Step II in order to access
the Internet.