56
WOOD COOKING STOVES
EN
All these operations must be planned in time with your Autorized Technical Assistance
Service.
• After a long ineffective time, before turning on the stove check if there are obstructions in the fume
exhaust.
• If the stove had been using continuously and intensely, the whole system (chimney included), must be
cleaned and checked more frequently.
• In case of replacement of damaged pieces please ask for the original spare part at the Autorized
Retailer.
Before any movement let the fire inside the combustion chamber extinguish till the total
cooling and always disconnect the plug from the socket (if there are).
11.2
BURNING POT AND ASH TRAY CLEANING
For a good combustion, before of every stove ignition, remove the ash which has settled in the burning pot.
The abundant ash obstructes the primary air flow which is fundamental for a good combustion.
• Remove ash from the burning pot by shaking it to let it fall in the ash tray.
• If full, the sah tray must be empty.
• Ash must be kept in a metal container with sealed cap, the same container must not ever be in contact
with flammable materials (for example lent over a wooden floor), as ash inside keeps embers glowing
for a long time.
• Only when the ash is completely extinguished can be throuwn in the organic waste.
• Clean the ash also in the ash compartment.
11.3
FUME PIPES ANNUAL CLEANING
Clean once a year from soot with brushes.
The cleaning operation must be executed by a specialized stove-repairer who will provide for the cleaning
of fume pipe, chimney flue and chimney pot. He will also check their eficiency and will release a written
declaration of the safety of the appliance. This operation must be executed at least once a year.
11.4
GENERAL CLEANING
For cleaning external and inner parts of the stove do not use steel wools, muriatic acid or other corrosive
and abrasive materials.
11.5
CLEANING OF PAINTED METAL PANELS
To clean painted metal panels use a soft cloth. Do not use degreasant agents like alcool, diluents, acetone,
gasoline because these could irremediably damage the varnish.
