![background image](http://html1.mh-extra.com/html/cadco/xaft-111/xaft-111_instruction-manual_3331274014.webp)
14
wait for it to cool down.
•
The parts that need ordinary maintenance can be reached by removing the front control panel and the
back of the oven.
2. SPECIAL MAINTENANCE
•
All maintenance operations must be done only by trained qualified personnel.
•
Before starting any maintenance operation, disconnect your oven from the electrical power supply and
wait for it to cool down.
2.1 REPLACEMENT OF DOOR LAMP (WHERE APPLICABLE)
Fig. A
1) Unplug the oven and allow to cool
down completely.
2). Open door completely as in
Fig. A.
3) Remove inner door glass by pulling
both glass holder clips back (
Fig. A
)
and lifting the glass carefully up and
back towards you.
Fig. B.
4) Place door glass gently on counter.
Fig. B
Fig. C
5) Unplug the yellow door light
connector by pulling the two sides apart
gently.
Figs. C & D
.
Fig. D
Fig. E
Fig. F
6) With Phillips head screwdriver,
unscrew and remove both light cover
brackets.
Figs. E-F-G
.
Fig. G
Fig. H
7) Slide the LED light assembly out of
the light cover.
Figs. H-I
.
Fig. I