8
•
SELECT STEP 1
♦
(1) Press the STEP button
♦
(2) The LED corresponding to STEP 1 lights up
•
SELECT BUTTON
The SELECT button allows the operator to select and set
these functions for STEPS 1, 2, and 3: TIME, TEMPERATURE, and
(
Dynamic control models only
)
HUMIDITY.
•
SETTING THE COOKING TIME / DURATION
♦
(1) To choose the Time function, press the SELECT button
repeatedly until the blue Time LED is lit next to the Time icon
(clock) on the control panel.
♦
(2) To set the time function, use the or button. Hold the
button down to quickly scroll to desired setting.
♦
(3) The LED display shows the time in hours and minutes (ex. 130 =1 hour and 30 minutes)
♦
The maximum time allowed in each step is 9 hours and 59 minutes, which will show in the display
window as “
959
”. Minimum time per step is 1 minute.
♦
FOR CONTINUOUS OPERATION
, (the oven will operate in continuous mode until the operator
intervenes):
STEP 1 > Press the button when time is set at “
0
”, and “
INF
” will appear in the display window.
The oven will then work continuously until you stop it by pressing the START / STOP button.
•
SETTING THE COOKING TEMPERATURE
♦
(1) Press the SELECT button until the blue Temperature
LED is lit next to the Temperature icon (thermometer) on the
control panel.
♦
(2) To set the desired temperature, use the or buttons.
Hold the button down to quickly scroll to desired setting.
♦
(3) The LED display shows the temperature setting in Fahrenheit.
♦
The usable operating temperature range is approx. 175°F to 500°F. The default temperature is 356°F.
♦
START-UP DELAY
: To obtain an oven start-up delay or to pause the oven for a certain time (useful
for leavening) set “
PAU
” (PAUSE) on the "cooking temperature" parameter, and set the pause
duration with the "cooking time" parameter (see previous section).
Access the “
PAU
” setting by pressing the button until it goes below 32°F to “
PAU
” on the LED
display. During “
PAU
” the oven is paused: the fan and resistors are off.
•
SETTING HUMIDITY (
Dynamic control models only
)
♦
(1) Press the SELECT button until the blue Humidity
indicator light is lit next to the Humidity icon (water drops)
on the control panel.
♦
(2) To set the percentage of humidity, press the or
buttons. Humidity can be set from low of 0 (“
oFF
”) to a high
of 100, in increments of 20.
These ovens are not designed for steaming foods.
♦
(3) The LED display shows the percentage of humidity.
♦
When operating below 300°F, a maximum humidity setting of 40 or less is recommended. Otherwise,
the oven may develop excess water in the cooking cavity.
♦
The parameter HUMIDITY is:
Optional (if the parameter is not set, the oven uses standard convection cooking with no humidity.)
Available only if the temperature is equal to or above 194°F (90°C).
Available with the following settings: 0% (“oFF”) - 20% - 40% - 60% - 80% - 100%.
