Cadco CAPO-203, User Manual

Page: 11 / 47

11
•
When the former program number is dialed in, the time indicator window should read “000”, the
temperature window will read “032” and only the first [#1] cycle light should be illuminated.
This indicates a vacant program.
To Use a Saved Program:
•
Using the “Program Selector Dial” find the number of the program you wish to use. The number
will be displayed in the “Program” window.
•
Start the selected program by pressing the "Manual Start/Stop" touch pad.
•
The tone will sound when the cooking cycle[s] have been completed.
Preheat a Program
•
The program may be preheated by pressing the “Prog Start” touch pad in the “Program” section
of the control panel.
•
When the program is activated in this manner you will hear the oven running but, the lights will
not be illuminated, and the timer will not count down.
•
The oven is being preheated to a temperature higher than the program was set for to compensate
for the heat lost while the oven is being loaded.
•
When the oven is preheated a continuous tone will sound. The operator then; opens the door,
loads the product, and closes the door.
•
The lights are on showing the values of the chosen program, and the program is now running.
•
A tone will indicate that the program has finished the programmed cooking cycle.
To Change a Saved Program
•
Using the “Program Selector Dial” choose the number of the program you’d like to modify.
•
Change the values you’d like to modify in each cycle.
•
Save the new program by pushing and holding the “Prog Mem" touch pad in each cycle after the
changes have been made
. After you have completed all the changes you are going to make in
each cycle, hold the “Prog Mem” touch pad for one final time [until you hear the continuous
tone].
•
The revised program is now in memory and ready for use.
Multi Cycle Cooking
Multi cycle cooking allows the Line Chef™ Combination Oven to advance into a maximum of 4
separate cooking cycles automatically. Much of your food preparation will be a one cycle operation.
There will be times when some operators will want to
∆ T and hold their foods overnight. Other times
when you may have found that three or four cycles work best for preparation of a certain food. The Line
Chef™ Combination Oven makes it possible to cook foods in as many as 4 separate, automatic,
preparation cycles.
This is a multi [2] cycle program you can use for quick rethermalizing of frozen entrees such as Lasagna:
•
Press the touch pad next to the “Time” dial to illuminate “Cycle 1”.
•
Illuminate the “Set Temp” light next to the “Cavity” icon.
•
Set the “Time” for 20 minutes using the “Time Dial”.