Cadac S-Type, Installation & User Manual

Page: 34 / 74

5-6 Stereo input module 8412
S-Type Revision S2005-6
814154 +) # (4 # &XW 2 %RRVW #)# )UHTXHQF\ # FRQWURO #4 N 8 +] #0#48 N+]
This dual concentric control allows the centre frequency to be adjusted between
1k5Hz to 15kHz (lower control) and the gain to be adjusted by ±18dB (upper control).
The gain control is centre detented.
814155 +) # 4 0 FRQWURO
The Q-control varies the bandwidth of the selected frequency when gain is applied
as per 5.1.21. As indicated on the front panel when turned towards the low ‘Q’ sym-
bol (Q approximately 1.0) will cause a wide bandwidth of frequencies to be affected
around the selected centre frequency. When set toward the high ‘Q’ symbol (‘Q’
approximately 3.0) a narrow band of frequencies will be affected around the centre
frequency.
814156 +0) # (4 # &XW 2 %RRVW #)# )UHTXHQF\ # FRQWURO ##733 +] #0#7 N+]
This dual concentric control allows the centre frequency to be adjusted between
400Hz to 4kHz (lower control) and the gain to be adjusted by±18dB (upper control).
The gain control is centre detented.
814157 +0) # 4 0 FRQWURO
The Q-control varies the bandwidth of the cut/boost frequency selected as per
5.1.23. The function of the Q-control is described in 5.1.22.
814158 /0) # (4 # &XW 2 %RRVW #)# )UHTXHQF\ # FRQWURO #93 +] #0#933 +]
This dual concentric control allows the centre frequency to be adjusted between
60Hz to 600Hz (lower control) and the gain to be adjusted by ±18dB (upper control).
The gain control is centre detented.
814159 /0) # 4 0 FRQWURO
The Q-control varies the bandwidth of the selected frequency when gain is applied
as per 5.1.25. The function of the Q-control is described in 5.1.22.
81415: /) # (4 # &XW 2 %RRVW #)# )UHTXHQF\ # FRQWURO #53 +] #0#533 +]
This dual concentric control allows the centre frequency to be adjusted between
20Hz to 200Hz (lower control) and the gain to be adjusted by±18dB (upper control).
The gain control is centre detented.
81415; /) # 4 0 FRQWURO
The Q-control varies the bandwidth of the selected frequency when gain is applied
as per 5.1.27. The function of the Q-control is described in 5.1.22.