4-8
Mono input module 8411
S-Type
Revision S2005-6
714164
3)/
Press the PFL button to send the pre-fader signal to the LISTEN module. Note that
selecting PFL will clear any previously selected PFL’s, unless HLD (Hold) is selected
on the Stereo master module 8414. If HLD is pressed, then the PFL will be added to
any previously selected signals on the Listen bus.
A temporary hold-function can be achieved by selecting and holding the desired
PFL. While holding down this switch you can add additional PFL channels as
required. Pressing any of the selected PFL switches a second time will clear the
selections and resume normal operation.
714165
0HWHU
This is a 12-segment level meter showing the signal level immediately pre-fader.
714166
)DGHU
This 100mm conductive plastic P&G fader is used to control the signal level.
714167
23(1
#0#
2SHQ
#
IDGHU
#
/('
This LED illuminates when the fader is open and not muted locally or by a VCA mas-
ter.
Summary of Contents for S-Type
