![background image](http://html1.mh-extra.com/html/cadac/s-type/s-type_installation-and-user-manual_3243871024.webp)
4-6
Mono input module 8411
S-Type
Revision S2005-6
714154
+)
#
(4
#
&XW
2
%RRVW
#)#
)UHTXHQF\
#
FRQWURO
#4
N
8
+]
048
N+]
This dual concentric potentiometer allows the centre frequency to be adjusted
between 1k5Hz and 15kHz (lower control) and the gain to be adjusted by ±18dB
(upper control). The gain control is centre detented.
714155
+)
#
4
0
FRQWURO
The Q-control varies the bandwidth of the selected frequency selected as per 4.1.21.
As indicated on the front panel when turned towards the low ‘Q’ symbol (Q approxi-
mately 1.0) will cause a wide bandwidth of frequencies to be affected around the
selected centre frequency. When set towards the high ‘Q’ symbol (‘Q’ approximately
3.0) a narrow band of frequencies will be affected around the centre frequency.
714156
+0)
#
(4
#
&XW
2
%RRVW
#)#
)UHTXHQF\
#
FRQWURO
#733
+]
#0#7
N+]
This dual concentric potentiometer allows the centre frequency to be adjusted
between 400Hz and 4kHz (lower control) and the gain to be adjusted by ±18dB
(upper control). The gain control is centre detented.
714157
+0)
#
4
0
FRQWURO
The Q-control varies the bandwidth of the selected frequency selected as per 4.1.23.
The function of the Q-control is described in 4.1.22.
714158
/0)
#
(4
#
&XW
2
%RRVW
#)#
)UHTXHQF\
#
FRQWURO
#93
+]
#0#933
+]
This dual concentric potentiometer allows the centre frequency to be adjusted
between 60Hz and 600Hz (lower control) and the gain to be adjusted by ±18dB
(upper control). The gain control is centre detented.
714159
/0)
#
4
0
FRQWURO
The Q-control varies the bandwidth of the cut/boost frequency selected as per
4.1.25. The function of the Q-control is described in 4.1 22.
71415:
/)
#
(4
#
&XW
2
%RRVW
#)#
)UHTXHQF\
#
FRQWURO
#53
+]
#0#533
+]
This dual concentric potentiometer allows the centre frequency to be adjusted
between 20Hz and 200Hz (lower control) and the gain to be adjusted by ±18dB
(upper control). The gain control is centre detented.
71415;
/)
#
4
0
FRQWURO
The Q-control varies the bandwidth of the cut/boost frequency selected as per
4.1.27. The function of the Q-control is described in 4.1.22.
Summary of Contents for S-Type
