Cadac S-Type, Installation & User Manual

Page: 27 / 74

Mono input module 8411 4-9
Revision S2005-6 S-Type
715 5HDU # SDQHO #0# PRQR # LQSXW # FKDQQHO # PRGXOH #;744
MICROPHONE INPUT
INSERT SEND
INSERT RETURN
DIRECT OUTPUT
Inputs and outputs are electronically balanced and con-
nected via 3-pin XLRs and follow the wiring convention:
PIN 1 = Screen
PIN 2 = In-phase signal (hot)
PIN 3 = Out-of-phase signal (cold)
The 0.25” TRS jack connectors use the wiring conven-
tion:
TIP = In-phase signal (hot)
RING = Out-of-phase signal (cold)
SLEEVE = Screen
IMPORTANT NOTE: Pin 1 on XLR connectors and the
‘sleeve’ connections on the jack sockets are connected
to the FRAME. This is to ensure that the console can
comply with the Electromagnetic Compatibility (EMC)
directive.