![background image](http://html1.mh-extra.com/html/cadac/b-type/b-type_installation-and-user-manual_3239265047.webp)
Central Control Module 7896
2-19
Revision B2005-2
B-Type
L
,
5HYHUW
#
7LPH
The time it will take for a motorized fader to resume its original position is set using
the option
Revert Time
in the User Setup in the CCM. Enter a value with the numeri-
cal button and then press
Enter.
M
,
3&
#
&RPPV
#
(UURU
If the B-Type is used without a PC, this function disables the “ERR” button and pre-
vents it from flashing because of missing Comms. There are two modes; “Hard” and
“Soft”. Hard mode will cause the “ERR” button to flash when Comms are missing
(when a PC and a CCM are used) and Soft mode will cause the “ERR” button to
flash in the event of any other error than missing Comms.
■
■
■
■
Using the arrow keys, select
“PC Comms Error?”
from the User Setup menu and
press Enter.
The display shows “
PC Error: “
■
■
■
■
Press Enter to toggle between Hard and Soft.
■
■
■
■
Press Esc.
N
,
*OREDO
#
OHYHO
This function is not yet implemented.
Summary of Contents for B-Type
