
Osc, Comms & PFL module 7758 (M-Type groups)
11-7
Revision B2005-2
B-Type
4414154
&RPPXQLFDWLRQV
#
0HWHU
#
6HOHFW
“MIC AMP”
Monitors the output level from the “Communications Microphone
Amplifier.
“T/T Bus”
Monitors the output level to group and matrix modules.
“T/T” LINE
Monitors the output level on the “T/B LINE O/P” connectors on
the rear panel.
“T/T FOH”
Monitors the output level on the “T/B TO FOH” connector on the
rear panel.
“I/P FROM FOH”
Monitors the input level on the “T/B FROM FOH” connector on
the rear panel.
A 20-segment LED meter that displays the output/input levels from the communica-
tions source select switches.
4414155 7;
9
#
21
2
2))
The “48V” switch connects phantom power to the I/P line of the “Communications
Input amplifier”. This allows you to use most makes of capacitor microphones as the
“COMMS MIC”.
4414156
+LJK
#
3DVV
#
)LOWHU
##
A high pass filter is included in the communications input citcuit.The frequency at
which the filter starts to “turn-over” (also known as the knee or -3 dB point for the fil-
ter) is selected by moving a “jumper-link” on the motherboard. The frequencies avail-
able are 60, 160 and 400 Hz.
This switch selects the HPF IN or OUT of circuit.
4414157
&RPPV
#
0LF
#
*DLQ
The ‘MIC GAIN’ control allows wide range of microphone or line level signals to be
accommodated by the module. Up to +60dB of gain is available.
4414158
&RPPV
#
0LF
#
3)/
A PFL switch for monitoring the communications input circuit.
4414159
7DON
#
WR
#
*URXSV
#)#
0DWUL[
#
/HYHO
A potentiometer for adjusting the level sent from the “Communications Input Ampli-
fier” to the group and matrix modules.
441415:
7DON
#
WR
#
*URXSV
#)#
PDWUL[
A routing switch to connect the output from the “Communications Input Amplifier” to
the group and matrix modules.
441415;
7DON
#
WR
#
¶/LQH·
#
/HYHO
A potentiometer for adjusting the level sent from the “Communications Input Ampli-
fier” to the ‘T/B LINE O/P” connector on the rear panel.
441415<
7DON
#
WR
#
/LQH
A routing switch to connect the output from the “Communications Input Amplifier” to
the “T/B LINE O/P” connector on the rear panel.
Summary of Contents for B-Type
