![background image](http://html1.mh-extra.com/html/cadac/b-type/b-type_installation-and-user-manual_3239265101.webp)
Matrix Module 7770
8-5
Revision B2005-2
B-Type
“FROM”
Pre or post INSERT
Pre or post Fader
“TO LISTEN”
L2 (always mono)
L1 in mono
L1 in stereo
;14153
0DWUL[
#
%
#
WR
#
/LVWHQ
#
0RGXOH
As above for Matrix Group B.
;14154
0DWUL[
#
*URXS
#
WR
#
/LVWHQ
#5
Press this switch to monitor the Matrix Groups on the L2 section of the Listen Mod-
ule. This is one of three ‘pre-set’ monitor destination switches, so you will not “hear”
anything until you press one of the “Matrix to Listen Module switches”. Note that L2 is
always in mono.
;14155
0DWUL[
#
*URXS
#
WR
#
/LVWHQ
#4#+
LQ
#
PRQR
,
Press this switch to monitor the Matrix Groups on the L1 section of the Listen Module
in mono. This is one of three ‘pre-set’ monitor destination switches, so you will not
“hear” anything until you press one of the “Matrix to Listen Module” switches. Note
that L1 is a stereo monitoring circuit, so the ‘L1 MONO” switch puts the signal from
either Matrix Group (in the section) to L1 left and right outputs.
;14156
0DWUL[
#
*URXS
#
WR
#
/LVWHQ
#4#+
6WHUHR
,
Press this switch to monitor the Matrix Groups on the L1 section of the Listen Module
in stereo. This is one of three ‘pre-set’ monitor destination switches, so you will not
“hear” anything until you press one of the “Matrix to Listen Module” switches. Note
that L1 is a stereo monitoring circuit, so if the Matrix A to listen” switch is pressed, the
signal from Matrix Group A is only routed to the L1 left output. Similarly, if “Matrix
Group B to Listen” switch is pressed, the signal from matrix Group B is only routed to
the L1 right output.
;14157
0DWUL[
#
VHFWLRQ
#
WR
#
/,67(1
#
PRGXOH
#
¶35(·
#
,16(57
One of two ’source’ selection switches. The default monitor condition for the Matrix
Groups is POST INSERT, POST FADER (both “FROM” switches not selected).
;14158
0DWUL[
#
VHFWLRQ
#
WR
#
/,67(1
#
PRGXOH
#
¶35(·
#
)$'(5
One of two “source’ selection switches. The default monitor condition for the Matrix
groups is POST INSERT, POST FADER (both “FROM” switches not selected).
Press the “PRE FAD” switch to change both Matrix Group monitor points to ‘pre-
fader’.
;14159
0DWUL[
#
VHFWLRQ
#
WR
#
/,67(1
#
PRGXOH
#
¶3267·
#
)$'(5
The “POST FAD” LED is illuminated when the “PRE FAD” switch is not.
;1415:
0DWUL[
#
PRGXOH
#
,62/$7(
When ISO is ON, the module is effectively disconnected from the computer system.
It cannot send data to the computer, or receive data from the computer, but the pro-
grammable switches will still work manually.
All programmable modules, faders (including DC Masters), may be put in isolate
Summary of Contents for B-Type
