Cadac B-Type, Installation & User Manual

Page: 42 / 142

2-14 Central Control Module 7896
B-Type Revision B2005-2
■
■ ■
■
If there is a fault, a fault code is displayed indicating the type of fault.
This test automatically returns to “Test comms?”.
K , 6KRZ # 7LPH
In the system menu, select “ Test Routines?” using the Up or Down arrow button.
The display shows “ Test Routines?”.
■ ■ ■ ■
Press [
↵
], followed by the Down Arrow button, until the display shows “ Show
Time? ”
■
■ ■
■
Press [
↵
]. The display shows the time as set in the PC.
Press [Esc] to return to the system menu or Down arrow to perform next test.
L , 6KRZ # 'DWH
In the system menu, select “ Test Routines?” using the Up or Down arrow button.
The display shows “ Test Routines?”.
■ ■ ■ ■
Press [
↵
], followed by the Down Arrow button, until the display shows “ Show
Date? ”
■ ■ ■ ■
Press [
↵
]. The display shows the date as set in the PC.
Press [Esc] to return to the system menu or Down arrow to perform next test.
NOTE: The Time/Date do not increment when power is removed from the console.
They rely upon SAM updating them when communications are first established.
M , 9LHZ # (UURU # /RJ
In the system menu, select “ Test Routines?” using the Up or Down arrow button.
The display shows “ Test Routines?”.
■ ■ ■ ■
Press [
↵
], followed by the Down Arrow button, until the display shows “ View Error
Log? ”
■
■ ■
■
Press [
↵
]. The display lists the time and date of errors/events.
■ ■ ■ ■
Select Time/Date with the arrow keys.
■ ■ ■ ■
Press the Right arrow key to display the type of error.
■ ■ ■ ■
Press the Left arrow key to get back to the list of time/date.
NOTE: Some messages are included in the error log for debugging purposes that
are not in themselves errors. Examples are Time/Date reset or Host is Séance on
the display are not errors.
Press [Esc] to return to the system menu.
N , &OHDU # (UURU # /RJ
In the system menu, select “ Test System?” using the Up or Down arrow button.
The display shows “ Test System?”.
■ ■ ■ ■
Press [
↵
], followed by the Down Arrow button, until the display shows “ Clear
Error Log? ”
■ ■ ■ ■
Press [
↵ ↵↵ ↵
]. The log is cleared and the event is entered in the Error log.
This test automatically returns to the system menu.