manualshive.com logo in svg

Cactus V6 IIs, User Manual, Page: 70 / 94

Share
Download
Cactus V6 IIs User Manual Download Page 70

70

To conserve energy when you forget to switch 
off the V6 IIs after use, the sleep timer 
will switch the V6 IIs to the sleep mode 
after a specif ied period. In <SLEEP>, choose 
from <OFF>, <15 MINS>, or <60 MINS>.

To wake up the V6 IIs from sleep mode, press 
any button or turn the selection dial once. 
Local triggering via a hot shoe or x-sync 
port also awakens the V6 IIs.

Note:

 Wireless triggering will not wake up 

the V6 IIs RX units remotely.

The working distance of the V6 IIs can be 
customized to suit your shooting purpose. 
In <WORK RANGE>, choose <SHORT> when you 
need to place the V6 IIs TX units very close 
to the RX units (e.g., when shooting macro), 
or choose <LONG> for normal shots. While the 
<SHORT> option will reduce the maximum  
effective distance of the V6 IIs by  
approximately 70 percent, it will eliminate 
the interference caused by placing the  
V6 IIs TX and RX units in close proximity.

16.5 

Sleep 
Timer

16.6 

Work 
Range

All manuals and user guides at all-guides.com

Summary of Contents for V6 IIs































































































Reviews:

No comments