63
2. To set a delay time in milliseconds, turn
the dial to <SET MS> and press
. Turn
the dial to set each digit, press
to
conf irm, and move to another digit.
3. To set a delay time in seconds, turn
the
dial to <SET SEC> and press
. Turn
the dial to set each digit, press
to
conf irm, and move to another digit.
4. The status screen of V6 IIs TX and main
screen of the V6 IIs RX will show the
status of the delay timer (see Section 6).
There may be some situations in which you
would like to f ire the slave groups in a
very short sequence such as:
•
Post-production of high dynamic range
(HDR) photos:
In burst mode,
photographers can take two pictures
of the same scene with contrasted flash
power levels very quickly. The resulting
pictures can be very handy in the post-
production of HDR photos.
•
Evaluating the individual contribution
of the slave groups:
Taking a series of
pictures in burst mode will allow you
to review the contribution of each slave
group individually.
15.4
Group
Sequence
All manuals and user guides at all-guides.com