manualshive.com logo in svg

Cactus V6 IIs, User Manual, Page: 6 / 94

Share
Download
Cactus V6 IIs User Manual Download Page 6

6

2. Cautions and Warnings

Before using your V6 IIs, read the following 
safety precautions to ensure correct and 
safe use:

1.  Turn OFF all your equipment (e.g., Cactus 

units, flash units, cameras, etc.) before 
changing batteries. Observe the correct  
polarity when changing batteries. There 
is a danger of explosion if the batteries 
are installed incorrectly.

2.  Switch off the transceiver and remove 

batteries during storage.

3.  Do not permanently store the product in 

a high temperature environment (i.e., 
under strong direct sunlight, near  
cooking stoves/oven).

4.  The Cactus V6 IIs should never be  

submerged in liquid or exposed to heavy 
rain unless it is properly protected.

5.  Do not operate the device in the presence 

of flammable gases or fumes.

6.  Do not disassemble.
7.  Do not crush the V6 IIs and do not expose 

it to any shock or force such as  
hammering, dropping, or stepping on it.

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for V6 IIs































































































Reviews:

No comments