56
1. Connect the V6 IIs RX to your camera
using an appropriate shutter release
cable.
2. Set both the V6 IIs TX and RX to the same
channel. On the V6 IIs TX, activate the
group assigned to the V6 IIs RX.
3. Half-press
on the TX to test the
auto focus. The status LED on both the
TX and RX will turn ORANGE to indicate
auto focus. Press
completely on the
TX for shutter release. The status LED
on both transceivers will turn GREEN to
indicate shutter release.
1. Set the camera to Bulb.
2. Press completely and hold
on the
V6 IIs TX. The status LED on the V6 IIs
TX and V6 IIs RX will turn GREEN at f irst
and go off after approximately
2 seconds. The LCD display will show
<BULB MODE ON>.
3. Release
on the V6 IIs TX. The
camera’s shutter is now in a continuous
open state.
4. To close the camera’s shutter, press
completely and release
on the
V6 IIs TX again. The green status LED
on both the TX and RX will blink
simultaneously.
14.2
Bulb
Mode
All manuals and user guides at all-guides.com
all-guides.com