manualshive.com logo in svg

Cactus V6 IIs, User Manual, Page: 39 / 94

Share
Download
Cactus V6 IIs User Manual Download Page 39

39

12.1.3    Quick   Power   Adjustment   Mode

By turning the dial left or right one 
“click”, the power level of the chosen 
groups will increase or decrease by one 
step. The EV step in the V6 IIs factory  
setting is 1/3 EV. The EV step can be  
conf igured to 1/2, 1/3, or 1/10 in the <EV 
STEP> menu (see Section 12.3).

If you wish to quickly change the power 
level using a larger interval, use the quick 
power adjustment mode.

1.  Switch on the V6 IIs in TX mode. Press 

  

and turn the selection dial to  
<PREFERENCES>. Press 

 and turn the  

selection dial to <SWAP CONTROL>. Press 

, turn the selection dial to <QUICK 

POWER ADJ> and press 

 to choose.

2.  In the main screen of the V6 IIs in TX 

mode, press 

 once to enter the quick 

power adjustment mode.

3.  In this mode, each click of the dial will 

increase or decrease the power level 
for 1EV to and from the original value, 
respectively. For example, if the power 
level of a group was 1/16 +3, one click 

All manuals and user guides at all-guides.com

Summary of Contents for V6 IIs































































































Reviews:

No comments