34
11. Flash Triggering
To command the flash units in different
groups to f ire:
1. Set the V6 IIs transceivers to the
correct mode (transmitter to “TX”,
receiver to “RX”). This will
automatically power on the transceivers
(see Section 9.4).
2. Set both the TX and RX to the same
channel (see Section 9.5).
3. Assign RX unit(s) to A, B, C, or D group
and activate the group(s) on the TX (see
Section 9.6).
4. Connect the V6 IIs RX to portable flashes
or studio strobes.
5. On the TX, press
completely. The
status LED of both the TX and RX should
blink in green simultaneously. The
portable flashes or studio strobes will
f ire at the same time.
6. Test f ire a particular group by pressing
the group button and
completely and
simultaneously.
7. Attach the TX to the camera’s hot shoe.
If your camera does not have a hot shoe,
connect the TX to the camera using an
All manuals and user guides at all-guides.com