manualshive.com logo in svg

Cactus V6 IIs, User Manual, Page: 5 / 94

Share
Download
Cactus V6 IIs User Manual Download Page 5

5

above the x-sync shutter speed.

4. 

Multi-master

 supports up to 20  

photographers f iring the same set of 
flashes at their own power setting. 

5. 

AF-assist light

 assists focusing in low 

light environments.

6. 

Flash prof 

ile customization

 ensures  

accurate power output.

7. 

Work seamlessly with the RF60 series

 to 

support HSS and Power Sync.

8.  Plenty of 

useful features inherited from 

the V6

: including Lo Power, Absolute 

Power, TTL Pass-through, Group Sequence, 
Sports Shutter, Remote Shutter, Relay 
Mode, and Delay Mode.

Both V6 IIs and V6 II transceivers compile 
the D-TTL (digital through-the-lens)  
protocols from different camera systems and 
build up a common language between cameras 
and flashes.

When working with the V6 II, the V6 IIs 
transceiver is a gateway to sync your Sony 
cameras to almost any digital flashes in the 
world.

Ready to go? Let’s get started and see what 

the V6 IIs can do!

1.2 

Cactus  
V6 IIs 
Core 

All manuals and user guides at all-guides.com

Summary of Contents for V6 IIs































































































Reviews:

No comments