![background image](http://html1.mh-extra.com/html/cactus/v6-ii/v6-ii_manual_3228642019.webp)
Section 11.3).
On the V6 II LCD screen, the configured flash system will be represented by the icons
below:
Canon
(Canon
Flash
Icon)
Fujifilm
(Fujifilm
Flash
Icon)
Nikon (Nikon
Flash
Icon)
Olympus / Panasonic (M43) (Olympus
Flash
Icon)
Pentax
(Pentax
Flash
Icon)
11.1 Detecting an Auto Flash Profile
The auto flash profile is camera system specific. It works with all digital flash within
the same camera system to produce a moderately accurate (error within 0.3EV) flash
output.
The V6 II is capable of auto detecting the flash system of the attached flash.
1. Attach your flash to the V6 II and turn on the flash.
2. Switch on the V6 II to the RX mode (for slave flashes) or TX mode (for master
flash).
3. The V6 II will detect the flash system of the attached flash during the start up.
The LCD screen will show the auto-detected flash system briefly before loading
the main screen.
4. The V6 II will memorize the detected flash system after power cycles until the
next detection.
If you wish to obtain more accurate output that is fine-tuned for your specific flash
units, choose the model-specific flash profiles (see Section 11.2) or customize the
existing flash profiles (see Section 11.3).
11.2 Choosing a Flash Profile