Note: External USB Power cannot charge the rechargeable batteries inside the V6 II
battery compartment.
20.2 Checking and Updating Firmware
Cactus will release new firmware for the V6 from time to time. Get your V6 updated
via the USB connection.
To check the firmware version of the V6 II, press and hold and , then switch
on the V6 II in TX or RX mode at the same time. The LCD display will show the
firmware version installed in the unit. Release the buttons, the LCD display will
return to the main screen after 3 seconds.
To perform a firmware update when available:
1. Switch off the V6 II and remove the batteries inside.
2. Connect it with a computer via the Cactus mini-USB cable MU-1 (optional).
3. Press and hold , then switch on the V6 II in TX or RX mode at the same time.
4. The V6 II is now in firmware update mode. The status LED blinks in red rapidly.
The firmware update program will then recognize the connected V6 and start the
upgrade.
Please visit www.cactus-image.com/v6.html for more information.
Firmware updates only work on Microsoft Windows platform. Mac OS is not
supported.
21. Optional Accessories
1. Wireless Flash RF60x / RF60
2. Wireless Flash Trigger V6
3. Laser Trigger LV5
4. Shutter Release Cables
(Cactus Shutter Cables are available for most camera models by Canon, Leica,
Minolta, Nikon, Olympus, Panasonic, Pentax, Samsung, and Sony. Please visit our
website for compatible models.)
5. Sync Cables and Adapters
-
PC Sync Cable CA-200