1. LCD Backlight Auto Off: The LCD backlight of the V6 II will turn on
whenever , , the selection dial, and any of the group buttons has been
pressed or turned. In order to conserve energy, there is a timer setting that
automatically turns off the backlight. In <BACKLIGHT OFF>, choose from <OFF>,
<5 SECS>, <15 SECS> or <STAY ON>.
2. LCD Backlight Power: In <BACKLIGHT POWER>, configure the brightness of LCD
display from 1 to 9.
3. LCD Daylight Mode: Enable <DAYLIGHT MODE> if you work under direct sunlight.
The LCD screen will replace the reversed fonts with black fonts on white
background.
17.5 Sleep Timer
To conserve energy when you forget to switch off the V6 II after use, the sleep timer
will switch the V6 to the sleep mode after a specified period. In <SLEEP>, choose
from <OFF>, <15 MINS> or <60 MINS>.
To wake up the V6 II from the sleep mode, press any button or turn the selection dial
once. Local triggering via a hot shoe or x-sync port also awakens the V6.
Note: Wireless triggering will not wake up the V6 II RX units remotely.
17.6 Work Range
The working distance of the V6 II can be customized to suit your shooting purpose. In
<WORK RANGE>, choose <SHORT> when you need to place the V6 II TX units very
close to the RX units (e.g., when shooting macro), or choose <LONG> for normal
shots. While the <SHORT> option will reduce the maximum effective distance of the
V6 II by approximately 70%, it will eliminate the interference caused by placing the
V6 TX and RX units in close proximity.
17.7 Factory Reset
To retrieve to the original manufacturing setting of the V6 II and erase all the custom
flash profiles, use Factory Reset. In the <FACTORY RESET> sub-menu, press and
turn the dial to <YES>. The screen will show <CONFIRM?>. Press to confirm.
18. Working with Cactus Gear
