RX: Yes (Green)
shoe contact
- Clean the hot shoe
contacts of the V6 with a
clean cloth
2. Flash used is not
compatible with the V6
II
Check that the flash used is
compatible with the V6 II
(see Section 7.1)
3. Poor cable connection
- Check the cable
connection
- Change the cable
4. Wrong cable is used
(only when the V6 is
used as a Wireless
Shutter Release)
Ensure that an appropriate
shutter release cable is
used
23. Notices
Notices for Customers in the U.S.A.
Federal Communications Commission (FCC) Radio Frequency Interference
Statements.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
"#$""$'
#"''"@'
HARVEST ONE LIMITED AND THE MANUFACTURER OF THIS WIRELESS FLASH
