background image

The purchaser/user of this product

 (if they 

are  not  the  same  person)  and  the  parent 
and guardian of the user (if user is below 
the age of 18) understands that the use of 
this product may expose the user to certain 
unavoidable  risks,  dangers,  and  hazards. 
The  purchaser/user  of  this  product 
voluntarily  assumes  these  risks.    Before 
using this product, the purchaser/user has 
carefully reviewed, understood, and agrees 
to  comply  with  the  terms  of  the  User's 
Manual.  The purchaser/user of this product 
understands and agrees to comply with the 
terms  of  the  sale.    The  purchaser/user  of 
this product understands that the seller is 
not responsible for any damage to property 
or  injury  caused  by  negligent  operation  of 
this product by the purchaser or user, and 
the purchaser/user releases the seller from 
all  such  liability.  Kiteboarding  is  an  adult 
sport.  Power  kites  and  their  lines  and 
control  equipment  can  be  dangerous  to 
flyers and to anyone in the vicinity of their 
use.  Kiteboarding  must  be  taken  seriously 
and  we  recommend  that,  at  least  in  the 
early  stages  of  your  use,  you  seek  the 

guidance  of  professional  instructors  and 
experienced  kiteboarders.  Improper  and/or 
negligent  use  of  this  kite  may  result  in 
serious  injury  or  death  to  yourself  and 
others.  Do  not  use  your  kite  near  power 
lines, airports or streets, and keep your kite 
fly  lines  away  from  people  and  obstacles. 
Always  fly  in  an  open  area,  observe  wind 
and  weather  conditions,  particularly  in 
circumstances  where  you  may  encounter 
offshore  winds  or  strong  winds.  Do  not 
attempt to use your kite on water until you 
are confident and comfortable with the use 
of  a  trainer  kite  on  land.  Spend  time  to 
become familiar with the operation of your 
kite and remember that you are responsible 
for its safe operation and for the safety of 
those  around  you.  As  you  learn  the  sport, 
work within your own limitations and do not 
exceed them. If you intend to use the kite on 
water,  always  use  appropriate  safety  and 
flotation devices and do not attach yourself 
or tie yourself permanently to the kite lines. 
The kite is not intended for use as a flying 
device nor indeed is it intended as a means 
of flotation.

www.cabrinhakites.com

FOR CURRENT UPDATES TO THIS MANUAL,

PLEASE VISIT OUR WEBSITE AT:

IF  YOU  ARE  BELOW  THE  AGE  OF  18,  YOU 

SHOULD  LET  YOUR  PARENT  OR  GUARDIAN 

READ  THE  ABOVE  STATEMENT  AND  THIS 

MANUAL  AND  SHOULD  NOT  USE  THIS 

PRODUCT UNLESS UNDER PROPER GUIDANCE 

AND  SUPERVISION  OF  SUCH  PERSON  OR 

PERSONS WHO HAVE READ THIS MANUAL.

YOU MUST READ THE 

INCLUDED USER MANUAL 

BEFORE USING THIS 

PRODUCT

THIS WARNING IS FOR YOUR OWN SAFETY 

AND PROTECTION.  IF YOU DO NOT AGREE 

WITH  THESE  TERMS  AND  CONDITIONS,  DO 

NOT  USE  THIS  PRODUCT.  KINDLY  RETURN 

THIS  PRODUCT  BEFORE  USING  IT,  AND 

YOUR  PURCHASE  PRICE  WILL  BE 

REFUNDED  IN  FULL.    THE  INFORMATION 

CONTAINED IN THIS MANUAL IS FOR YOUR 

REFERENCE  AND  MAY  BE  SUBJECT  TO 

CHANGE AT ANYTIME.

IMPORTANT

WARNING!

DO NOT USE THIS PRODUCT UNLESS YOU AGREE

WITH THE FOLLOWING TERMS AND CONDITIONS

RELEASE OF LIABILITY

AND ASSUMPTION OF RISK

Summary of Contents for CO2 2005















































Reviews: